TrueMill © U.S. Patent No. 7,451,013
TrueMill & OSG - 420 Stainless
420 Stainless cut with Surfcam's Patented TrueMill cutting path. This was machined on a Makino S56 (15hp). The tool is a 3/4'' OSG Exocarb SUS with a .040rad. Cutting parameters are: 6500 rpm / 125 ipm / .700'' doc / 53deg eng (.15 stepover).
TrueMill © U.S. Patent No. 7,451,013
TrueMill - 1018 High Speed Camera Clip
Surfcam's TrueMill peeling chips out of a block of 1018 steel with a TrueMill certified SwiftCarb endmill.
9600 rpm / 200 ipm / .75 doc / .5'' Swiftcarb endmill.
TrueMill © U.S. Patent No. 7,451,013
TrueMill - 718 Inconel
Surfcam TrueMill cutting 718 Inconel on a Haas VF2-SS. Using a Nikken mill chuck and a TrueMill certified Swiftcarb endmill we are able to cut the following parameters: .5'' EM - .75 DOC 130 IPM 3121 RPM 25.8 TEA (.025 stepover) - .0036 CT 2.4375 MRR 408.56 SFM
TrueMill © U.S. Patent No. 7,451,013
TrueMill - 1018
Surfcam TrueMill cutting in 1018 steel on a Haas VF2-SS with a .5'' Swiftcarb endmill and Nikken tool holder. We are cutting .75 DOC - 60 deg TEA (.125 Stepover) - 9500 RPM - 200 IPM - 50 IPM helical plunge
TrueMill © U.S. Patent No. 7,451,013
TRUEMill IMTS 2010 Demo on Hardinge GX-1000 Machine
Demo cutting 4140 alloy from the Hardinge booth at IMTS 2010.
.5" RampMill from SwiftCarb
Lyndex-Nikken Holder
Blaser coolant
Depth: 1.00"
Speed: 7500 rpm
Feed: 475 ipm
Max Stepover: .039
Tool Engagement Angle: 32.5 degrees
MRR (Material Removal Rate): 18.6 in3/min
