 |
| |
Sight and Illumination Mount Tower. TrueMill Case Study |
|
"TrueMill® just hums. It’s a fantastic technology.
I think that TrueMill is a technology for those with smaller and older machines too."
says Lowell Kenney, ATSS Mounts, Advanced Tactical Sighting Systems, Shelton, WA
Eagle View Research Center , LLC has been able to deliver modern sighting systems that have saved lives in Iraq. We couldn't have done it without TrueMill."
|
|
|
|
|
Benchmark: ATSS MKIV Sight & Illumination Mount Tower |
|---|
| 1018 Steel | Without TrueMill | TrueMill | Results |
|---|
| Depth Of Cut | 0.2" | 0.6255" | 313% deeper |
| Spindle Speed (RPM) | 2000 | 6000 | 300% higher |
| Feedrate (IPM) | 15 | 60 | 400% faster |
| Cycle Time / Part | 17 | 9 | 53% less |
| Cost to run entire part | $18.42 | $9.75 | 53% savings |
| Cutting tool life | 3 towers | 12 towers | 400% longer |
|
|
|
|
|
|
SURFCAM, TRUEMill, and Surfware are registered trademarks of Surfware, Inc. Copyright 1990-2010+, Surfware, Inc. All rights reserved.
Surfware, Inc. 100 Camino Ruiz, Camarillo, California 93012, USA
Toll free: 800-SURFWARE (787-3927), Phone: (818) 991-1960, Fax: (818) 991-1980
Sales Inquiries: sales@surfware.com