 |
| |
Titanium Gear Side Plate. TrueMill Case Study |
|
"With TrueMill®, we can't evacuate chips from the machine fast enough. What a nice problem to have!"
says Anthony Reyes, Foreman, C&H Machine.
|
|
|
|
| Benchmark Part: Landing Gear Side Plate |
|---|
| Without TrueMill | TrueMill | Results |
|---|
| Feedrate (Roughing) | 100 IPM | 500 IPM | 5x higher |
| Cycle Time / Part | 4.5 hours | 3 hours | 33% faster |
| Warpage / Part | 0.035 in | 0.014 in | 60% less |
|
|
|
|
|
Reduced cost and better quality. The chips were removed more efficiently, which kept the parts cooler to reduced part expansion.
|
SURFCAM, TrueMill, and Surfware are registered trademarks of Surfware, Inc. Copyright 1990-2008+, Surfware, Inc. All rights reserved.
Surfware, Inc. 100 Camino Ruiz, Camarillo, California 93012, USA
Toll free: 800-SURFWARE (787-3927), Phone: (818) 991-1960, Fax: (818) 991-1980
Sales Inquiries: sales@surfware.com